TRAFFIC CONTROLLER S15

EQUIPMENT DESCRIPTION

The S15 is a 6 phase traffic controller, based on wide scale integration circuit, designed to meet vehicular and pedestrian traffic control needs. The equipment is built in a modular way facilitating repairs and upgrades. It can work in isolation, synchronized with other traffic controllers via GPS or connected to a centralized system.

It complies with the COVENIN Standard 2753-1999 and NEMA TS2. It`s adaptable to most of the vehicular intersections. Its simplicity, robustness and adaptability has made it worthy of the preference of our clients throughout the national territory during he last decade.

GENERAL CHARACTERISTICS

  • 6 phase controller, 2 selectables as overlapping.
  • Vehicular and pedestrian configurable phases.
  • Configuration of the phase output secuence.
  • Two optional detectors per phase, configurable as vehicular, pedestrian or omission of the pedestrian or vehicular phase.
  • Synchronization via GPS.
  • Interminttent output fully configurable per phase.
  • High speed serial port for interfacing to centralized systems with simple data transfer protocol.
  • 16 configurable work plans, each one of 8 intervals.
  • 16 configurable plans for holidays or special days.
  • 9 work cycles including the programmed flashing cycle (00).
  • 16x2 LCD screen with backlight.
  • Optimized 4- key keyboard.
  • Real time clock with lithium battery backup with 9 years duration.
  • Solid state output switches, with zero crossing load activation increasing the life of luminaires.
  • Powerfull switched power supply.

TECHNICAL CHARACTERISTICS

  • AC power supply voltage from 90 V to 135 V.
  • 54 – 64 Hz working frequency.
  • 18 output circuits.
  • Time base accurate to 100 msec ± 1 msec.
  • Green time intervals, pedestrian crossing and pedestrian clearance configurable from 0 to 255 seconds.
  • Yellow range configurable from 0 to 9 seconds.
  • 1 Hz flashing frequency.
  • Configurable serial port to work on RS232 o RS485 protocol.
  • Ability to synchronize with controller network through GPS system.
  • Input and Output impedance to luminaires according to NEMA standard.
  • Opto – couple and zero crossing load switching for luminaires.
  • Dimensions: 0.70 x 0.45 x 0.38 m (with cabinet included).
  • Weight: 55kg (with cabinet included).