The S15 is a 6 phase traffic controller, based on wide scale integration circuit, designed to meet vehicular and pedestrian traffic control needs. The equipment is built in a modular way facilitating repairs and upgrades. It can work in isolation, synchronized with other traffic controllers via GPS or connected to a centralized system.

It complies with the COVENIN Standard 2753-1999 and NEMA TS2. It`s adaptable to most of the vehicular intersections. Its simplicity, robustness and adaptability has made it worthy of the preference of our clients throughout the national territory during he last decade.

• 6 phase controller, 2 selectables as overlapping.
• Vehicular and pedestrian configurable phases.
• Configuration of the phase output secuence.
• Two optional detectors per phase, configurable as vehicular, pedestrian or omission of the pedestrian or vehicular phase.
• Synchronization via GPS.
• Interminttent output fully configurable per phase.
• High speed serial port for interfacing to centralized systems with simple data transfer protocol.
• 16 configurable work plans, each one of 8 intervals.
• 16 configurable plans for holidays or special days.
• 9 work cycles including the programmed flashing cycle (00).
• 16x2 LCD screen with backlight.
• Optimized 4- key keyboard.
• Real time clock with lithium battery backup with 9 years duration.
• Solid state output switches, with zero crossing load activation increasing the life of luminaires.
• Powerfull switched power supply.

• AC power supply voltage from 90 V to 135 V.
• 54 – 64 Hz working frequency.
• 18 output circuits.
• Time base accurate to 100 msec ± 1 msec.
• Green time intervals, pedestrian crossing and pedestrian clearance configurable from 0 to 255 seconds.
• Yellow range configurable from 0 to 9 seconds.
• 1 Hz flashing frequency.
• Configurable serial port to work on RS232 o RS485 protocol.
• Ability to synchronize with controller network through GPS system.
• Input and Output impedance to luminaires according to NEMA standard.
• Opto – couple and zero crossing load switching for luminaires.
• Dimensions: 0.70 x 0.45 x 0.38 m (with cabinet included).
• Weight: 55kg (with cabinet included).